|
Programmable Ampere Time Meter
.... |
|
Digital V -
I - Amp
Time Meter |
|
Multi
parameter & functional instrument for plating & Battery
charging application. |
|
Display : |
6
Digits, Red LED. 4 Digit Batch & 6 Digit Time
Totaliser. |
|
Range : |
300.0 V, A:- 3.000A to 3000A
(Amp time 8 Amp sec to 9999 Amp Hrs)
(Note : Current & Amp Time are user settable) |
|
Range / Mode Selection:By front
panel / Buttons. |
|
|
Model At - F (Front Setting) |
|
Display :
|
6 Digits,
Red LED. |
|
Range : |
750 Counts
/ Sec to 3 Counts / Hr at 75mV input for
calibration factor setting at 1 and 999999
resp. ( User Settable )
|
|
Accuracy : |
0.1% of
reading ± 3 digits, Temperature co-efficient
100 ppm. |
Control
Action : |
On delay
or Off Delay.
|
|
Settings : |
User
programmable set values, calibration factor
and
control action |
|
Input Signal : |
mV ( from
shunt )
|
|
Output : |
1 C/O
Relay contacts rated for 5A / 230 V.AC
resistive load. |
Dimensions /
Cutouts : |
1]
96x96x150 / 91x91 2] 96x192x200 /
91x184mm |
|
|
MODEL AT – R ( Rear Setting )
|
|
All
specifications same as above except fixed control
action, Range setting (calibration factor) selection and
Totaliser Reset lock facility from Rear.
|
|
|DIGITAL TIMERS||FREQUENCY METERS||R. P.M.
METERS||DIGITAL
COUNTERS||PROGRAMMABLE AMPERE TIME METER||TEMPERATURE CONTROLLER| |
